Skip to main content

Maximum magnet distance

Thanks to the superior range and extreme stability and noise magnets can be sensed of distances more than 100x further than the Hall sensors of the competition. 

Space qualified

The XEN1210 and XEN1220 are used in many space missions and is tested for radiation dose and for single event effect with total proton fluence of 2.6e11/cm2  suitable for geostationary orbits

Suitable for many applications

Most available magnetic sensors are designed for single magnet setups, primarily for rotation applications. However, the XEN1210 and XEN1220 excel in more complex scenarios, where strategic placement of multiple sensors significantly enhances accuracy. Additionally, their daisy-chaining capability simplifies the overall system design.

Superior dynamic range

The useful dynamic range of the Sensixs Hall family exceeds that of its competitors, offering sensitivity on par with AMR while providing the extensive magnetic range characteristic of Hall sensors. Additionally, its outstanding gain and offset matching—over 100 times better than the competition—significantly enhance its performance.

Ease of use

Our sensors can be daisy-chained and operated as a unified system. Many challenges in magnetic systems can be addressed by utilizing multiple measurement points to stabilize mechanical deviations, mitigate magnetic offset fields, and gather spatial information through sine and cosine measurements.
Position/rotary SensorTechnologyAxisMagnetic rangeGain matching/DriftOffset Noise/LSBOffset Temp Drift Max magnet distance
XEN1210Silicon HallSingle point63mT1% typ<±2 µT50nT/√Hz
10nT/K

XEN1220Silicon Hall1, Differential63mT0.5% typ diff mismatch, 15ppm/K diff drift<±2 µT
50nT/√Hz
10nT/K


XEN1250Silicon HallSwitch63mT
High pass filter, ±2 µT switch threshold

No switching noise
200 mm
Infineon TLE493D familyHall planar +vertical3±160 mT (trimmable to ±50 mT)
Between X - Y 1%typ, 25% max. between XY - Z 25% max±200 µT typ100 µT/65 µT


Allegro A31315 (3DMAG)Hall planar + vertical2-3±100 mT
X-Y 1.5% max, 3% over temp, Z 1.5% typ, 4% over temp ±150 µT max600nT/√Hz
2.5µT/K
ams AS5048A/B
Hall2D differential, Angle30–70 mT
  (Self calibration)1 degree (Self calibration) = ±150 µT 
—0.5 mm -2 mm
Melexis MLX90395Hall + IMC 350 mT (med) / 120 mT (high)
5% matching
600ppm/K
±200 µT
 100 µT/√Hz
—
TDK-Micronas HAL 39xy
3D hall Array3~10–130 mT

±200 µT

2 µT/K
-
4 µT/K